本文共 11224 字，大约阅读时间需要 37 分钟。

rt-thread采用内核对象管理系统来访问和管理所有内核对象.首先来看看rt-thread的内核对象是如何定义的:

1 数据结构

1.1 对象控制块 在include/rtdef.h头文件中可以找到内核对象有结构定义:

/**

 * Base structure of Kernel object  */ struct rt_object {     char       name[RT_NAME_MAX];//名称     rt_uint8_t type;//内核对象类型      rt_uint8_t flag;//内核对象标志           #ifdef RT_USING_MODULE     void      *module_id;//模块ID #endif     rt_list_t  list;//内核对象链表节点 }; typedef struct rt_object *rt_object_t;

这里需要注意地是,上述内核对象控制块包含了一rt_list_t类型的成员list,这个是一链表节点,便于将此内核对象加入到一链表中,其结构如下定义:

struct rt_list_node

{     struct rt_list_node *next; //指向下一节点     struct rt_list_node *prev; //指向前一节点 }; typedef struct rt_list_node rt_list_t;  

另内核对象类型取值有如下类型:

/**

 *  The object type can be one of the follows with specific  *  macros enabled:  *  - Thread  *  - Semaphore  *  - Mutex  *  - Event  *  - MailBox  *  - MessageQueue  *  - MemHeap  *  - MemPool  *  - Device  *  - Timer  *  - Module  *  - Unknown  *  - Static  */ enum rt_object_class_type {     RT_Object_Class_Thread = 0, //线程 #ifdef RT_USING_SEMAPHORE     RT_Object_Class_Semaphore, //信号量 #endif #ifdef RT_USING_MUTEX     RT_Object_Class_Mutex,   //互斥锁 #endif #ifdef RT_USING_EVENT     RT_Object_Class_Event,  //事件 #endif #ifdef RT_USING_MAILBOX     RT_Object_Class_MailBox,  //邮箱 #endif #ifdef RT_USING_MESSAGEQUEUE     RT_Object_Class_MessageQueue,  //消息队列 #endif #ifdef RT_USING_MEMHEAP     RT_Object_Class_MemHeap,      //内存堆 #endif #ifdef RT_USING_MEMPOOL     RT_Object_Class_MemPool,     //内存池 #endif #ifdef RT_USING_DEVICE     RT_Object_Class_Device,     //设备驱动 #endif     RT_Object_Class_Timer,      //时钟 #ifdef RT_USING_MODULE     RT_Object_Class_Module,     //模块 #endif     RT_Object_Class_Unknown,      //未知内核对象类型     RT_Object_Class_Static = 0x80  //rt-thread以此位标志是否为系统内核对象 }; 需要注意的是,rt-thread将内核对象的type的最高位若为1,则表示此内核对象为系统内核对象,否则非系统内核对象.

 1.2 内核对象容器 RTT使用内核对象容器来管理同一类型的内核对象,并将其放入同一链表中,便于访问.内核对象信息的结构如下定义:

/**

 * The information of the kernel object  */ struct rt_object_information {     enum rt_object_class_type type;          //内核对象类型     rt_list_t                 object_list;   //内核对象链表     rt_size_t                 object_size;   //内核对象所占的大小 };

 1.3 内核对象管理系统

RTT中,每一类型的内核对象都会有一内核对象容器来包容,这个类型的内核对象容器实际上是用一链表(见1.2节所示的内核对象容器结构定义),这个链表将所有相同类型的内核对象链接起来.由于每一类型都对应着有一个这样的内核对象容器来管理,那么所有内核对象容器整体就叫做内核对象管理系统.

如下图示：

RTT中,内核对象管理系统是用一个rt_object_information数组来实现的,如下:

#define _OBJ_CONTAINER_LIST_INIT(c)\//内核对象容器的链表初始化,这里用一个宏来定义,链表的前一节点和后一节点在初始化时都指向本身所在地址

    {&(rt_object_container[c].object_list), &(rt_object_container[c].object_list)}   //内核对象管理系统,这里用rt_object_information数组来实现 struct rt_object_information rt_object_container[RT_Object_Class_Unknown] = {     /* initialize object container - thread */)},//线程对象信息     {RT_Object_Class_Thread, _OBJ_CONTAINER_LIST_INIT(RT_Object_Class_Thread), sizeof(struct rt_thread#ifdef RT_USING_SEMAPHORE     /* initialize object container - semaphore *///信号量对象信息     {RT_Object_Class_Semaphore, _OBJ_CONTAINER_LIST_INIT(RT_Object_Class_Semaphore), sizeof(struct rt_semaphore)}, #endif #ifdef RT_USING_MUTEX     /* initialize object container - mutex *///互斥锁对象信息     {RT_Object_Class_Mutex, _OBJ_CONTAINER_LIST_INIT(RT_Object_Class_Mutex), sizeof(struct rt_mutex)}, #endif #ifdef RT_USING_EVENT     /* initialize object container - event *///事件对象信息     {RT_Object_Class_Event, _OBJ_CONTAINER_LIST_INIT(RT_Object_Class_Event), sizeof(struct rt_event)}, #endif #ifdef RT_USING_MAILBOX     /* initialize object container - mailbox *///邮箱对象信息     {RT_Object_Class_MailBox, _OBJ_CONTAINER_LIST_INIT(RT_Object_Class_MailBox), sizeof(struct rt_mailbox)}, #endif #ifdef RT_USING_MESSAGEQUEUE     /* initialize object container - message queue *///消息队列对象信息     {RT_Object_Class_MessageQueue, _OBJ_CONTAINER_LIST_INIT(RT_Object_Class_MessageQueue), sizeof(struct rt_messagequeue)}, #endif #ifdef RT_USING_MEMHEAP     /* initialize object container - memory heap *///内存堆对象信息     {RT_Object_Class_MemHeap, _OBJ_CONTAINER_LIST_INIT(RT_Object_Class_MemHeap), sizeof(struct rt_memheap)}, #endif #ifdef RT_USING_MEMPOOL     /* initialize object container - memory pool *///内存池对象信息     {RT_Object_Class_MemPool, _OBJ_CONTAINER_LIST_INIT(RT_Object_Class_MemPool), sizeof(struct rt_mempool)}, #endif #ifdef RT_USING_DEVICE     /* initialize object container - device *///设备驱动对象信息     {RT_Object_Class_Device, _OBJ_CONTAINER_LIST_INIT(RT_Object_Class_Device), sizeof(struct rt_device)}, #endif     /* initialize object container - timer *///时钟对象信息     {RT_Object_Class_Timer, _OBJ_CONTAINER_LIST_INIT(RT_Object_Class_Timer), sizeof(struct rt_timer)}, #ifdef RT_USING_MODULE     /* initialize object container - module *///模块对象信息     {RT_Object_Class_Module, _OBJ_CONTAINER_LIST_INIT(RT_Object_Class_Module), sizeof(struct rt_module)}, #endif };

 2 内核对象接口 2.1 内核对象初始化 RTT提供静态和动态两种初始化接口,如下:

静态初始化是将一个已经存在的且占有内存空间的对象初始化,它的接口如下:

/**

 * This function will initialize an object and add it to object system  * management.  *  * @param object the specified object to be initialized.  * @param type the object type.  * @param name the object name. In system, the object's name must be unique.  */ void rt_object_init(struct rt_object         *object,//指向已存在的对象指针                     enum rt_object_class_type type,  //对象的类型                     const char               *name)  //对象的名字字符串 {     register rt_base_t temp;     struct rt_object_information *information;      //对象容器   #ifdef RT_USING_MODULE //如果使用了模块,那么对象容器指向本线程所包含的对象窗口,否则指向全局对象管理系统中对应的容器     /* get module object information */     information = (rt_module_self() != RT_NULL) ?          &rt_module_self()->module_object[type] : &rt_object_container[type]; #else     /* get object information */     information = &rt_object_container[type]; #endif       /* initialize object's parameters */       /* set object type to static */     object->type = type | RT_Object_Class_Static;//设置系统对象标志       /* copy name */     rt_strncpy(object->name, name, RT_NAME_MAX);//给名字赋值       RT_OBJECT_HOOK_CALL(rt_object_attach_hook, (object));//使用钩子函数       /* lock interrupt */     temp = rt_hw_interrupt_disable();//关中断       /* insert object into information object list */     rt_list_insert_after(&(information->object_list), &(object->list));//将初始化的内核对象加入到对应容器中       /* unlock interrupt */     rt_hw_interrupt_enable(temp);//开中断 } 动态初始化是指对象原本并不存在,在不内存中,需要动态为其分配内存,其接口如下:

 

/**

 * This function will allocate an object from object system  *  * @param type the type of object  * @param name the object name. In system, the object's name must be unique.  *  * @return object  */ rt_object_t rt_object_allocate(enum rt_object_class_type type, const char *name)//动态初始化接口只需要传入名字和类型 {     struct rt_object *object;     register rt_base_t temp;     struct rt_object_information *information;//对象容器       RT_DEBUG_NOT_IN_INTERRUPT;   #ifdef RT_USING_MODULE//同上面那个接口一样,获取对象容器     /*      * get module object information,      * module object should be managed by kernel object container      */     information = (rt_module_self() != RT_NULL && (type != RT_Object_Class_Module)) ?                   &rt_module_self()->module_object[type] : &rt_object_container[type]; #else     /* get object information */     information = &rt_object_container[type]; #endif       object = (struct rt_object *)rt_malloc(information->object_size);//为对象动态分配内存空间     if (object == RT_NULL)     {         /* no memory can be allocated */         return RT_NULL;     }          /* initialize object's parameters */       /* set object type */     object->type = type;//设置类型       /* set object flag */     object->flag = 0;//设置标志为0   #ifdef RT_USING_MODULE     if (rt_module_self() != RT_NULL)     {         object->flag |= RT_OBJECT_FLAG_MODULE;//如果使用了模块功能,则将flag标志设置为模块标志     }     object->module_id = (void *)rt_module_self();//设置模块ID #endif       /* copy name */     rt_strncpy(object->name, name, RT_NAME_MAX);//给名称赋值       RT_OBJECT_HOOK_CALL(rt_object_attach_hook, (object));//使用钩子函数       /* lock interrupt */     temp = rt_hw_interrupt_disable();//关中断       /* insert object into information object list */     rt_list_insert_after(&(information->object_list), &(object->list));//将此对象加入对应容器       /* unlock interrupt */     rt_hw_interrupt_enable(temp);//关中断       /* return object */     return object; }

 2.2 脱离或删除对象

如果对象是静态初始化的,那么对应的是脱离,如果是动态初始化的,则是删除.

脱离接口如下:

/**

 * This function will detach a static object from object system,  * and the memory of static object is not freed.  *  * @param object the specified object to be detached.  */ void rt_object_detach(rt_object_t object) {     register rt_base_t temp;       /* object check */     RT_ASSERT(object != RT_NULL);       RT_OBJECT_HOOK_CALL(rt_object_detach_hook, (object));//使用钩子函数     /* lock interrupt */     temp = rt_hw_interrupt_disable();//关中断       /* remove from old list */     rt_list_remove(&(object->list));//从窗口中移除       /* unlock interrupt */     rt_hw_interrupt_enable(temp);//开中断 } 删除接口如下:

 

/**

 * This function will delete an object and release object memory.  *  * @param object the specified object to be deleted.  */ void rt_object_delete(rt_object_t object) {     register rt_base_t temp;       /* object check */     RT_ASSERT(object != RT_NULL);     RT_ASSERT(!(object->type & RT_Object_Class_Static));//删除的对象必须是非系统对象     RT_OBJECT_HOOK_CALL(rt_object_detach_hook, (object));//使用钩子函数       /* lock interrupt */     temp = rt_hw_interrupt_disable();//关中断       /* remove from old list */     rt_list_remove(&(object->list));//从对应的容器中移除       /* unlock interrupt */     rt_hw_interrupt_enable(temp);//开中断   #if defined(RT_USING_MODULE) && defined(RT_USING_SLAB)//如果使用了模块功能且采用的是SLAB动态内存管理模式     if (object->flag & RT_OBJECT_FLAG_MODULE)          rt_module_free((rt_module_t)object->module_id, object);//释放模块ID所占空间     else #endif       /* free the memory of object */     rt_free(object);//释放内核对象所占空间 }

 其中rt_list_remove会自动找到对象的前一节点和后一节点,然后删除本身节点.

2.3 判断是否为系统内核对象

/**  * This function will judge the object is system object or not.  * Normally, the system object is a static object and the type  * of object set to RT_Object_Class_Static.  *  * @param object the specified object to be judged.  *  * @return RT_TRUE if a system object, RT_FALSE for others.  */ rt_bool_t rt_object_is_systemobject(rt_object_t object) {     /* object check */     RT_ASSERT(object != RT_NULL);       if (object->type & RT_Object_Class_Static)//RTT是通过内核对象的type的最高位是否为1来判断此对象是否为系统内核对象的         return RT_TRUE;       return RT_FALSE; } 2.4  查找内核对象

 

/**

 * This function will find specified name object from object  * container.  *  * @param name the specified name of object.  * @param type the type of object  *  * @return the found object or RT_NULL if there is no this object  * in object container.  *  * @note this function shall not be invoked in interrupt status.  */ rt_object_t rt_object_find(const char *name, rt_uint8_t type) {     struct rt_object *object;     struct rt_list_node *node;     struct rt_object_information *information;     extern volatile rt_uint8_t rt_interrupt_nest;       /* parameter check *///输入系统检查     if ((name == RT_NULL) || (type > RT_Object_Class_Unknown))         return RT_NULL;       /* which is invoke in interrupt status */     if (rt_interrupt_nest != 0)//确保当前没有中断嵌套         RT_ASSERT(0);       /* enter critical */     rt_enter_critical();//进入临界区       /* try to find object */     information = &rt_object_container[type];//获取对应的对象容器     for (node  = information->object_list.next;//开始通过名字来扫描内核对象          node != &(information->object_list);          node  = node->next)     {         object = rt_list_entry(node, struct rt_object, list);//获取内核对象         if (rt_strncmp(object->name, name, RT_NAME_MAX) == 0)//判断名字是否相符         {             /* leave critical */             rt_exit_critical();//退出临界区               return object;         }     }       /* leave critical */     rt_exit_critical();//退出临界区       return RT_NULL; }  

3 内核对象系统初始化

/**  * @ingroup SystemInit  *  * This function will initialize system object management.  *  * @deprecated since 0.3.0, this function does not need to be invoked  * in the system initialization.  */ void rt_system_object_init(void) { }

从源代码可以看出,自从0.3.0以后,RTT就已经没有必须再使用此接口来对内核对象初始化了,因此,此函数是空的,但在系统初始化时还会保留调用些函数.

 至此,RTT的内核对象系统源码分析已完! ———————————————— 版权声明：本文为CSDN博主「flydream0」的原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接及本声明。 原文链接：https://blog.csdn.net/flydream0/article/details/8568463